Everbuild Forever Clear Sanitary Silicone C3 Size Cartridge

Product information
FOREVER CLEAR containing STERITOUCH actively prevents the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity. With STERITOUCH anti-bacterial solution integrated into the manufacturing process, Forever White is guaranteed to stop mould, mildew and bacterial growth. Forever White is independently tested and certified by an independent microbiological laboratory to show no mould growth after more than 10 yrs simulated ageing. Copies of test data are given on last page. Forever white is permanently waterproof and flexible and is produced from a superior silicone formula. Certified under the harmonized European standard EN15651 for fa ade, cold climate and sanitary applications in compliance with the Construction Product Regulation.th within 10 years of application simply return pack and receipt of purchase to Everbuild and we will refund your purchase and postage costs. CAUTION: This guarantee is only valid providing regular cleaning has been carried out, STERITOUCH helps prevent the growth of mould, mildew and bacteria that can stain and degrade silicone, however it is not a substitute for regular cleaning as excessive deposits of soap can cause secondary mould growth. Nothing in this statement does or will affect your statutory rights.

Limitations
Do not use in aquaria; use Aqua mate Sealant
Do not use against surfaces that bleed oil or plasticizers, or against bitumen/pitch based products.
Not intended for exterior use.
It is always the user s responsibility to determine suitability of use. If in doubt request technical data or contact Technical Services department before use.

Application
All surfaces to be sealed must be sound, clean and dry.
Fill deep gaps and voids with Everbuild Expanding Foam, then trim back level with bath/shower tray before applying Sealant.
When applying to plastic acrylic baths, fill bath half full wit

Guarantee - Statutory
Features and benefits
Specification Form Stable white Paste, I component RTV silicone. Specific Gravity 0.98 - 1.05 Viscosity (S70 brookfield, 10rpm) 100-200,000 cps Skin Formation Time 15-20 mins at 20 C ~ 23 C/50% RH Through Cure 4mm/24 hours~ 23 C/50% RH Extrusion Rate 450ml/min Tensile Strength 0.6N/mm ~ to ISO 8339 Elongation % 250 to ISO 8339 Modulus at 100% Elongation N/mm2 0.35 to ISO 8339 Hardness (shore A) 20 Movement Acc. 25% EN15651-1 Application temps +5 to +40 C Flexibility (service temps) -40 to +180 C

Specification
Ideal for wet areas: Perfect for sealing baths, showers, sinks, and tiled areas.
Form Stable white Paste, I component RTV silicone.
Specific Gravity 0.98 - 1.05
Viscosity (S70 brookfield, 10rpm) 100-200,000 cps
Skin Formation Time 15-20 mins at 20 C ~ 23 C/50% RH
Through Cure 4mm/24 hours~ 23 C/50% RH
Extrusion Rate 450ml/min